Guides
  • 🦨Introduction to real-time wireless camera trapping
  • Fundamentals
    • 🛰️Are wireless camera traps right for you?
    • 📷Types of wireless camera traps
    • 👾Integrating artificial intelligence
  • TNC Wireless Camera Trap Documentation
    • Intro
    • Buckeye X80 networked wireless cameras
      • Managing the camera network
        • Anydesk
        • Buckeye MultiBase SE
        • Advanced
      • Deploying and moving the cameras & repeaters
        • Before you begin
        • Setting up a camera / repeater node
        • When you return to your desk
      • Deploying a new Base Station
    • Reconyx HyperFire II cellular cameras
    • RidgeTec Lookout cellular cameras
    • Cuddelink cameras
    • Hardware deployment best practices
    • Managing your data with Animl
    • Network cost calculator
  • About us
    • Contact us
    • Recommended Citation
Powered by GitBook
On this page
  1. TNC Wireless Camera Trap Documentation
  2. Buckeye X80 networked wireless cameras

Deploying a new Base Station

PreviousWhen you return to your deskNextReconyx HyperFire II cellular cameras

Last updated 2 years ago

Detailed instructions for configuring a new Base Station Computer can be found in the Github repository:

animl-base
GitHub - tnc-ca-geo/animl-base: Application deployed on Rasberry Pi wireless camera trap base stationGitHub
Logo